1.1 General
1.1 General
This validation test plan defines the test requirements for verifying that the design of remote terminals meet the requirements of MIL-STD-1 553B “Digital Time Division Command/Response Multiplex Data Bus.” A remote terminal is considered to have failed to meet the above requirements if that remote terminal fails any test or a portion of any test performed according to this test plan. Passing this test plan does not automatically mean that the remote terminal is acceptable for use by the government. The remote terminal must also meet all the requirements of MIL-STD-1553B over all the environmental EMI vibration and application requirements in the subsystem specification.
1.2 Application
1.2 Application
This general test plan is intended for design verification of remote terminals designed to meet the requirements of MIL-STD-1553B Notice 2. Appendix A and B provide cross references between this test plan and MIL-STD-1 553B. For those remote terminals not required to meet Notice 2 Appendix C and D list the changes in this test plan for MIL-STD-1553B only and MIL-STD-1553B Notice 1. These requirements shall apply to the terminal under test when invoked in a specification or statement of work.